Mrs. Gabriela Draghici | Material Behavior | Best Faculty Award

Lecturer | Ovidius University of Constanta, Faculty of Civil Engineering | Romania

Drăghici Gabriela, lecturer and PhD engineer at “Ovidius” University of Constanta, Faculty of Civil Engineering, is an accomplished expert in civil and industrial constructions, specializing in the modernization of industrial buildings through the use of composite materials, structural rehabilitation, geotechnical analysis, and consolidation of historical monuments; she completed her engineering degree at the Polytechnic Institute “Gh. Asachi” Iaşi and obtained her PhD with a thesis on the modernization of industrial constructions, subsequently earning certifications as a construction site supervisor in multiple domains including buildings, industrial structures, agricultural constructions, pipelines for petroleum transport, and restoration of historical monuments; her research portfolio includes high-impact publications such as risk analysis in special rehabilitation operations for airport runways and platforms, technological design methodologies for constructions under special conditions, performance and post-utilization behavior of civil constructions, comparative studies of traditional and industrialized roof structures, and the geotechnical properties of water-sensitive soils such as loess, contributing to sustainable civil infrastructure development; she has actively participated in international conferences and authored multiple papers in journals like Ovidius University Annals Series: Civil Engineering, Buletinul AGIR, and proceedings of GeoChina International Conference, demonstrating a commitment to advancing civil engineering practice through applied research, structural innovation, and material science, making her a strong candidate for the Best Researcher Award in civil and structural engineering innovation.

Featured Publications:

Postavaru, N., Draghici, G., Filip, C., Mohammed, A. R., & Mohammed, S. M. (Ovidius University Annals Series: Civil Engineering, 20, 79). Business management strategies for business development: Organization of the territory and planning of construction works.

Maftei, C., Buta, C., Draghici, G., & Filip, C. (IOP Conference Series: Earth and Environmental Science, 344(1), 012025). Analysis of changes in hydrometeorological variables of Techirghiol Lake.

Draghici, G., & Maican, A. M. (International Multidisciplinary Scientific GeoConference: SGEM, 18(5.3), 593-600). Modern solutions for sustainable, environmentally friendly construction. Filip, C., Breaban, V., Paduraru, G., & Draghici, G. (Ovidius University Annals Constanța. Series Civil Engineering, 1(10), 77). Disasters and risk mitigation measures.

Gabriela, D., Cosmin, F., Icociu, C. V., & Michele, B. H. (Bulletin of the Polytechnic Institute of Iași. Construction. Architecture). The contribution of databases to the planning of construction work with the consequent achievement of the required quality level.

Buta, C., Maftei, C., Dobrica, G., & Draghici, G. (IOP Conference Series: Materials Science and Engineering, 789(1), 012008). GIS-based landslide susceptibility for environment protection of Black Sea Romanian coast.

Cazacu, G. B., & Draghici, G. (GeoChina International Conference. Sustainable Civil Infrastructures, New Development in Soil). The geotechnical properties on water-sensitive soils, loess.

Draghici, G., Maican, A. M., & Rotaru, V. (Ovidius University Annals Series: Civil Engineering, 19, 79). Roof structures: Comparisons between traditional roof structures and industrialized ones.

Bizu, A. N., Isopescu, D. N., Draghici, G., & Blanari, I. (Materials, 18(18(19)), 4596). An experimental and FE modeling investigation of the pull-out behavior of anchoring solutions in concrete: A comparative study.

Mr. Basant Lal | Materials Characterization
| Young Scientist Award

Mr. Basant Lal , NIT SRINAGAR, India

Mr. Basant Lal is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

Professional Profiles:

Scopus

Professional Objective 🎯

Highly motivated, adaptable, and goal-oriented researcher seeking a position in the fields of Tribology (Nano-Micro-Macro), Surface Engineering, Bio-Materials, Metal Matrix Nano-composites, Interface Analysis, Spark Plasma Sintering Technology, Mechanical Behavior of Materials, and the Characterization and Mechanical Property Evaluation of Advanced Materials.

Education Qualifications 📚

Ph.D. in Mechanical Engineering
Dec 2019 – April 2024, Srinagar, India
National Institute of Technology, Srinagar
Thesis: “Microstructural Evaluation and Tribological Characteristic of Ti-6Al4V/TiC Composite Used for Hip Implant”
Supervisors: Dr. Abhijit Dey & Prof. M.F. WaniM.Tech in Mechanical Engineering
2014 – 2016, Srinagar, India
National Institute of Technology, Srinagar
Thesis: “Tribological Behaviors of Titanium and Its Alloys (Ti-6Al-4V)”
Supervisors: Prof. M.F. Wani & Prof. Satish Vasu Kailas, Indian Institute of Science, BangaloreB.Tech in Mechanical Engineering
2008 – 2012, Haryana, India
MDU University, Haryana
Project: “Anti-Lock Braking System”

Industrial Experience 💼

Indian Institute of Science (IISc), Bangalore
Research Project: Tribological Behaviors of Titanium and Its Alloys (Ti-6Al-4V)Talbros Automotive Components Ltd.
Position: Production Engineer
Role: Managing operations involving production plans & schedules and developmental workYKK Company
Summer Training: Slider DepartmentJai Bharat Maruti Ltd.
Summer Training: Wear and friction behavior of steel against aluminum pin under lubricated conditionsLotus Auto Engineering Ltd.
Summer Training: Machining Department

Materials Characterization Techniques 🔬

Optical Microscopy (OM)3D Optical ProfilometerField Emission Scanning Electron Microscopy (FE-SEM) with Energy Dispersive X-ray Spectroscopy (EDS)Nano-Indentation TechniqueRaman SpectroscopyWXRFX-ray Diffraction (XRD)Mechanical and Tribological Characterization Techniques

Strengths and Hobbies 🌟

Positive Attitude and Good Learning Skills
Hobbies: Writing Short StoriesGood Leadership Quality
Hobbies: Painting and SketchingAbility to Work in a Team
Hobbies: SingingInquisitiveness
Hobbies: Playing Puzzle Games

Membership of Professional Bodies/Organizations 👥

Life Member, Tribology Society of India (TSI)Professional Member, Institute of Scholars (InSc)Member, International Association of Engineers (IAENG)

Workshops and Short-Term Courses 🎓

Advanced Materials for Structural Applications
IIT Indore (29th Sep – 4th Oct 2020)Advanced Welding Technologies and Failure Analysis
IIT Indore (19th – 24th Sept 2020)Additive Manufacturing
NIT Srinagar (31st Aug – 9th Sep 2020)Recent Advances in Nano-Science and Technology (RANN-2020)
NIT Srinagar (24th – 28th Aug 2020)Recent Advances in Tribology and Surface Engineering SeriesSeries 1 of 4: Introduction to Tribology and Surface Engineering, Saintgits College of Engineering, Kottayam (23rd – 28th Nov 2020)Series 4 of 4: Surface Characterization and Treatment in Tribology, Saintgits College of Engineering, Kottayam (17th – 22nd Aug 2020)Series 2 of 4: Tribology of Machine Components and Applied Tribology, Saintgits College of Engineering, Kottayam (14th – 19th Sep 2020)

National/International Conferences Organized 🏆

Organizer Committee, “Tribo-India 2023”
Dept. of Mechanical Engineering, National Institute of Technology, Srinagar, IndiaOrganizer Committee, “1st Indo-Russian International Symposium 2022”
Dept. of Mechanical Engineering, National Institute of Technology, Srinagar, India

📖 Publications Top Note :

1. Effect of TiC Nano-Particle on Microstructure Evolution and Tribological Behaviour of Ti6Al4V Composites Fabricated via Spark Plasma Sintering

Authors: Lal, B., Dey, A.
Journal: Tribology International, 2024, 197, 109775

2. Fretting Wear Characteristics of Ti6Al4V/TiC Nano Composites Using Response Surface Method

Authors: Lal, B., Dey, A.
Journal: Tribology International, 2024, 193, 109412

3. Influence of TiCp Ceramic Reinforcement on Ti6Al4V Alloy Matrix via Spark Plasma Sintering Technique

Authors: Lal, B., Dey, A., Wani, M.F.
Journal: Advances in Materials and Processing Technologies, 2024

4. Effect of Frictional Heating on Mechanically Mixed Layers During Dry Sliding Contact of Ti-6Al-4V Alloys at High Temperature in Vacuum Condition

Authors: Lal, B., Dey, A., Wani, M.F.
Journal: Surface Review and Letters, 2022, 29(10), 2250127

5. Advances in Gravimetric Electronic Nose for Biomarkers Detection

Authors: Das, A., Lal, B., Manjunatha, R.
Journal: Series on Biomechanics, 2022, 36(2), pp. 128–140

6. Prediction of Surface Roughness During Dry Sliding Wear: Characteristics of Ti-6Al-4V Alloys

Authors: Lal, B., Dey, A., Wani, M.F.
Journal: International Journal of Surface Engineering and Interdisciplinary Materials Science, 2022, 10(1)

7. Dry Sliding Wear Behaviour of Ti–6Al–4V Pin Against SS316L Disc in Vacuum Condition at High Temperature

Authors: Kumar, D., Lal, B., Wani, M.F., Philip, J.T., Kuriachen, B.
Journal: Tribology – Materials, Surfaces and Interfaces, 2019, 13(3), pp. 182–189

Gabriela Draghici | Material Behavior | Best Faculty Award

Mrs. Gabriela Draghici | Material Behavior | Best Faculty Award

Lecturer | Ovidius University of Constanta, Faculty of Civil Engineering | Romania

Featured Publications: