Mr. Bipul Chandra Biswas | Renewable Energy System | Best Researcher Award

Student | Gopalganj Science and Technology University | Bangladesh

B.C. Biswas is an emerging researcher in electrical and electronic engineering with a core focus on power-system optimization, photovoltaic device simulation, and next-generation perovskite solar-cell technologies, combining expertise in circuit analysis, power distribution, energy-system design, and computational modelling; he earned his B.Sc. in Electrical and Electronic Engineering from Gopalganj Science and Technology University (GSTU) with academic distinction, ranking second in his department and receiving the Vice-Chancellor’s Award for academic excellence as well as the Young Researcher Award at ABCD Laboratory, where he served as Junior Research Collaborator in the Energy and Technology Research Division (ETRD) and contributed to investigations in renewable-energy integration and sustainable power-conversion strategies, developing solid skills in SCAPS-1D photovoltaic simulation, density-functional-theory-based material analysis, and machine-learning-driven optoelectronic optimization for lead-free perovskite absorbers such as Ca₃BiCl₃, Ca₃BiI₃, Sr₃PF₃, Ca₃NBr₃, Mg₃BiCl₃, Ca₃BiF₃, and Ca₃BiBr₃, authoring and co-authoring a series of peer-reviewed publications in journals including Journal of Computational Chemistry, Physica B Condensed Matter, Solar Energy Materials and Solar Cells, and Materials Science and Engineering B, where his research highlighted comprehensive optoelectronic property analysis, charge-transport-layer engineering, bifacial cell performance improvement, and machine-learning-guided HTL selection for enhanced open-circuit voltage and efficiency gains; his undergraduate thesis on perovskite-solar-cell performance optimization under the guidance of Dr A.T.M. Saiful Islam is under journal review, and he has several additional manuscripts on transport-layer tuning and advanced ML-assisted device modelling currently under peer-review, reflecting a strong trajectory of scholarly productivity at the entry level.

Profile: Google Scholar

Featured Publications:

Shimul, A. I., Biswas, B. C., Ghosh, A., Alrafai, H. A., & Hassan, A. A. (2025). A study on optoelectronic properties and charge transport layer influence in novel Sr₃PF₃-based perovskite solar cells using numerical simulation and machine learning. Solar Energy Materials and Solar Cells, 293, 113838.

Shimul, A. I., Biswas, B. C., Ghosh, A., Awwad, N. S., & Chaudhry, A. R. (2025). Performance assessment and machine-learning-driven optimization of Ca₃NBr₃-based bifacial perovskite solar cells: Improving VOC via HTL and charge-transport-layer analysis. Materials Science and Engineering: B, 322, 118600.

Biswas, B. C., Shimul, A. I., Ghosh, A., Awaad, N. S., & Ibrahium, H. A. (2025). Exploring lead-free Ca₃BiCl₃-based perovskite solar cells: A computational comparison of charge-transport layers with DFT and SCAPS-1D. Journal of Computational Chemistry, 46(25), e70231.

Biswas, B. C., Shimul, A. I., Alshihri, A. A., El-Rayyes, A., Khan, M. T., & Rahman, M. A. (2025). Design and optimization of Ca₃BiI₃-based solar cells through a comprehensive analysis of optoelectronic properties and charge-transport layers using simulation and ML. Physica B: Condensed Matter, 417770.

Mr. Yongbiao Mu | Lithium ion batteries | Best Researcher Award

PhD student of Medicine at Southern University of Science and Technology, China

Ph.D. in Material Science and Engineering (2021 – 2025) Southern University of Science and Technology (SUSTech), China Research Focus: Lithium/Zinc metal battery anodes, solid-state electrolytes, interface characterization.

Publication Profile

scholar

Education:

Ph.D. in Material Science and Engineering (2021 – 2025) Southern University of Science and Technology (SUSTech), China Research Focus: Lithium/Zinc metal battery anodes, solid-state electrolytes, interface characterization. M.S. in Materials Engineering (2016 – 2019) Harbin Institute of Technology (HIT), China Research Focus: Electrospun carbon nanofibers, CVD-grown vertically aligned graphene, lithium-ion battery anodes. B.S. in Water Quality Science and Technology (2004 – 2008) Nanjing Tech University, China Research Focus: Membrane materials, metal corrosion, and protection.

Work Experience:

Research Assistant (Mar. 2021 – Sep. 2021) Department of Mechanical and Energy Engineering, SUSTech, China. Engineer (Jan. 2019 – Mar. 2021) Materials Laboratory of Songshan Lake, Institute of Physics, Chinese Academy of Sciences, China.

Awards & Scholarships:

2023 National Scholarship for Ph.D. Students2023 Outstanding Graduate Student Model, SUSTech2023 Academic Star, SUSTech2022 Academic Star, SUSTech

Research Interests:

Key materials for secondary batteries (Lithium/Zinc metal anodes, solid-state electrolytes, high-energy-density silicon-carbon anodes).Advanced electrochemical characterizations (in-situ XRD, Raman, TEM, Aberration-Corrected EM, Cryo-EM).

Publication Top Notes

Graphene/MoS2/FeCoNi(OH)x and Graphene/MoS2/FeCoNiPx multilayer-stacked vertical nanosheets on carbon fibers for highly efficient overall water splitting

Authors: X. Ji, Y. Lin, J. Zeng, Z. Ren, Z. Lin, Y. Mu, Y. Qiu, J. Yu

Journal: Nature Communications, 2021

DOI: 10.1038/s41467-021-21735-3

Summary: This study presents the synthesis of vertical nanosheets composed of graphene, MoS2, and FeCoNi hydroxides/phosphides on carbon fibers. The engineered structure exhibits high catalytic activity for overall water splitting due to enhanced charge transfer properties and effective electrocatalytic performance.

2. A flexible, electrochromic, rechargeable Zn//PPy battery with a short circuit chromatic warning function

Authors: J. Wang, J. Liu, M. Hu, J. Zeng, Y. Mu, Y. Guo, J. Yu, X. Ma, Y. Qiu, Y. Huang

Journal: Journal of Materials Chemistry A, 2018

DOI: 10.1039/C8TA03155A

Summary: The research introduces a flexible Zn/PPy (polypyrrole) battery that features an electrochromic property allowing for a visual warning in case of a short circuit. This advancement improves battery safety and usability while maintaining high electrochemical performance.

3. 3D hierarchical graphene matrices enable stable Zn anodes for aqueous Zn batteries

Authors: Y. Mu, Z. Li, B. Wu, H. Huang, F. Wu, Y. Chu, L. Zou, M. Yang, J. He, L. Ye

Journal: Nature Communications, 2023

DOI: 10.1038/s41467-023-41448-0

Summary: This paper discusses the development of 3D hierarchical graphene matrices that significantly improve the stability of Zn anodes in aqueous Zn batteries, addressing issues of dendrite formation and enhancing cycling performance.

4. Growing vertical graphene sheets on natural graphite for fast charging lithium-ion batteries

Authors: Y. Mu, M. Han, J. Li, J. Liang, J. Yu

Journal: Carbon, 2021

DOI: 10.1016/j.carbon.2021.03.045

Summary: The authors present a method for growing vertical graphene sheets on natural graphite, which enhances the fast charging capability of lithium-ion batteries. The novel structure aids in improved lithium ion transport and cycling stability.

5. Nitrogen, oxygen‐codoped vertical graphene arrays coated 3D flexible carbon nanofibers with high silicon content as an ultrastable anode for superior lithium storage

Authors: Y. Mu, M. Han, B. Wu, Y. Wang, Z. Li, J. Li, Z. Li, S. Wang, J. Wan, L. Zeng

Journal: Advanced Science, 2022

DOI: 10.1002/advs.202104685

Summary: This study explores a novel anode design combining nitrogen and oxygen-doped vertical graphene arrays with high silicon content, resulting in improved lithium storage performance and stability.

6. Vertical graphene growth on uniformly dispersed sub-nanoscale SiO x/N-doped carbon composite microspheres with a 3D conductive network

Authors: M. Han, Y. Mu, F. Yuan, J. Liang, T. Jiang, X. Bai, J. Yu

Journal: Journal of Materials Chemistry A, 2020

DOI: 10.1039/C9TA12253F

Summary: The paper details the growth of vertical graphene on a novel composite microsphere structure, achieving enhanced conductivity and mechanical stability suitable for energy storage applications.

7. High zinc utilization aqueous zinc ion batteries enabled by 3D printed graphene arrays

Authors: B. Wu, B. Guo, Y. Chen, Y. Mu, H. Qu, M. Lin, J. Bai, T. Zhao, L. Zeng

Journal: Energy Storage Materials, 2023

DOI: 10.1016/j.ensm.2023.01.001

Summary: The authors report on a 3D printing technique to create graphene arrays, significantly improving zinc utilization in aqueous zinc-ion batteries while ensuring long-term cycling stability.

8. Growth of flexible and porous surface layers of vertical graphene sheets for accommodating huge volume change of silicon in lithium-ion battery anodes

Authors: M. Han, Z. Lin, X. Ji, Y. Mu, J. Li, J. Yu

Journal: Materials Today Energy, 2020

DOI: 10.1016/j.mten.2020.100445

Summary: This research focuses on creating flexible, porous vertical graphene layers that effectively manage the volume changes of silicon during cycling in lithium-ion batteries, thereby enhancing the durability of anodes.

9. Reconstruction of thiospinel to active sites and spin channels for water oxidation

Authors: T. Wu, Y. Sun, X. Ren, J. Wang, J. Song, Y. Pan, Y. Mu, J. Zhang, Q. Cheng, …

Journal: Advanced Materials, 2023

DOI: 10.1002/adma.202207041

Summary: This study investigates the transformation of thiospinel compounds into active sites for efficient water oxidation, contributing to advancements in photocatalytic water splitting technologies.

10. Oriented construction of efficient intrinsic proton transport pathways in MOF-808

Authors: X.M. Li, Y. Wang, Y. Mu, J. Gao, L. Zeng

Journal: Journal of Materials Chemistry A, 2022

DOI: 10.1039/D2TA02878K

Summary: This paper presents a method for constructing proton transport pathways in metal-organic frameworks (MOF-808), enhancing their efficiency in proton conduction applications.

11. Thermodynamically Stable Dual‐Modified LiF&FeF3 layer Empowering Ni‐Rich Cathodes with Superior Cyclabilities

Authors: Y. Chu, Y. Mu, L. Zou, Y. Hu, J. Cheng, B. Wu, M. Han, S. Xi, Q. Zhang, L. Zeng

Journal: Advanced Materials, 2023

DOI: 10.1002/adma.202212308

Summary: This research investigates a dual-modification approach to improve the stability and cyclability of Ni-rich cathodes, critical for advancing lithium-ion battery performance.

12. Flexible electrospun carbon nanofibers/silicone composite films for electromagnetic interference shielding, electrothermal and photothermal applications

Authors: Z. Li, Z. Lin, M. Han, Y. Mu, P. Yu, Y. Zhang, J. Yu

Journal: Chemical Engineering Journal, 2021

DOI: 10.1016/j.cej.2020.129826

Summary: The authors develop flexible composite films from electrospun carbon nanofibers and silicone, showcasing effective electromagnetic interference shielding and promising applications in electrothermal and photothermal technologies.

13. Recent advances in the anode catalyst layer for proton exchange membrane fuel cells

Authors: Z. Li, Y. Wang, Y. Mu, B. Wu, Y. Jiang, L. Zeng, T. Zhao

Journal: Renewable and Sustainable Energy Reviews, 2023

DOI: 10.1016/j.rser.2023.113182

Summary: This review summarizes recent advancements in anode catalyst layers for proton exchange membrane fuel cells, highlighting the materials and strategies that enhance performance.

14. High yield production of 3D graphene powders by thermal chemical vapor deposition and application as highly efficient conductive additive of lithium ion battery electrodes

Authors: X. Ji, Y. Mu, J. Liang, T. Jiang, J. Zeng, Z. Lin, Y. Lin, J. Yu

Journal: Carbon, 2021

DOI: 10.1016/j.carbon.2021.01.059

Summary: The authors present a method for producing 3D graphene powders via thermal chemical vapor deposition, which serve as highly efficient conductive additives in lithium-ion battery electrodes, enhancing electrochemical performance.