Assoc Prof Dr. Yves Mbono Samba | Structural dynamics | Best Researcher Award

Published on by Global Mechanics Awards

Assoc Prof Dr. Yves Mbono Samba | Structural dynamics | Best Researcher Award

Assoc Prof Dr. Yves Mbono Samba, University of Yaounde 1, Cameroon

Assoc Prof Dr. Yves Mbono Samba is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

 

Professional Profiles:

Scopus

đź“šEducation:

Doctorate in Mechanics, University of Paris 6 (June 1995)Diploma of Advanced Studies in Mechanics, University of Paris 6 (June 1991)MaĂ®trise (bachelor’s degree) in Mechanics, University of Paris 6 (September 1990)Degree in Physics, University of Paris Sud (June 1988)Diploma of General University Studies, UniversitĂ© Paris Sud (June 1986)

Experience:

Lecturer at University of Yaoundé 1 (since 1995)

Academic Achievements:

I have been actively involved in teaching, research, and student project supervision, guiding 7 PhD and 15 Master’s degree students over the years. My academic journey has been enriched by numerous publications and contributions to the field of mechanics.

1. Vortex Waves in Fluid–Structure Interaction with High Froude Number and a Damped Structure
Simo Kaptue, H., Ngou Zeufo, L., Mbono Samba, Y., Kofané, T.C.
Ocean Engineering, 2024, 306, 117946

2. Theoretical Analysis of Non-linear Dynamic Response of a Bridge Pier Under Two-phase Flow Excitation
Ngou, L.Z., Simo, H.K., Lekama, B.K., Fewo, S.I., Mbono Samba, Y.C.
Journal of Mechanical Science and Technology, 2023, 37(11), pp. 5683–5693

3. Examining Capillary Dynamics in Rectangular and Circular Conduits Subject to Unsteady Surface Tension
Azese, M.N., Engola, J.J., Hona, J., Yap, E.J., Mbono Samba, Y.C.
Journal of Fluid Mechanics, 2022, 949, A6

4. An Attempt to Study Foundation Anchoring Conditions in Sedimentary Estuaries Using Integrated Methods
Gounou Pokam, B.P., Domra Kana, J., Meli’i, J.L., Mbono Samba, Y.C., Njandjock Nouck, P.
Applied Sciences (Switzerland), 2022, 12(14), 7175

5. On the Existence and Determination of the Incompressible Laminar Flow Located in the Polar Plane of a Porous Annular Pipe
Makon, N.R., Ngo Nyobe, E., Lamara, M., Mbono Samba, Y.C., Pemha, E.
Alexandria Engineering Journal, 2022, 61(4), pp. 2637–2650

6. Effects of an External Constant Pressure Gradient on a Steady Incompressible Laminar Flow Through a Semi-porous Annular Pipe
Mbogba, G.L., Ngo Nyobe, E., Lamara, M., Mbono Samba, Y.C., Pemha, E.
Zeitschrift fĂĽr Naturforschung – Section A Journal of Physical Sciences, 2022, 77(2), pp. 131–141

7. Dynamic Analysis and Numerical Simulation of Flexible Multibody Systems
Mbono Samba, Y.C., Pascal, M.
Mechanics of Structures and Machines, 2001, 29(3), pp. 295–316

Dr. Masih Paknejad | precision machining Award | Best Researcher Award

Published on by Global Mechanics Awards

Dr. Masih Paknejad | precision machining Award | Best Researcher Award

Dr. Masih Paknejad, KSF (Kompetenzzentrum fĂĽr Spanende Fertigung), Germany

Dr. Masih Paknejad is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

Professional Profiles:

Orcid

Google scholar

Work Experience 🛠️

Institute of Advanced Machining (KSF), GermanyTeam Leader, Postdoctoral Research Fellow2023 – PresentMachine Tools Committee ISO/ISIRI TC 39, IranSenior Member, Chief and Technical Editor of Machine Tools Standards2022 – PresentTurbine Engineering and Manufacturing Co. (TUGA), IranExpert Engineer (R&D Department)2019 – 2021Persian Ultrasonic Co., IranCEO, Design and Manufacture of High Power Ultrasonic Transducer2019 – PresentHitec-Machinery Trading Co., IranTechnical Advisor, Supervisor of Test and Calibration of Machine Tools2017 – 2019Semnan University, IranLecturer2018 – 2019Courses: Materials Science and Engineering, Metrology Lab., Machine Tools Workshop, Engineering Drawing, Hydraulics and Hydraulics Lab, Welding WorkshopAmirkabir University of Technology, IranStrength of Material Lab Expert, Metrology Lab Expert, Teacher Assistant2012 – 2018Courses: Nontraditional Manufacturing Processes, Machine Element DesignIslamic Azad University (Saveh Branch), IranLecturer2011 – 2012Courses: Metrology, Production Methods, Nontraditional Manufacturing Processes

Education 🎓

Furtwangen University – KSF Institute
Feb 2022 – Sep 2023Postdoc FellowTitle: Ultras-Short Pulse Laser-Assisted Micro-Grinding of Silicon CeramicsAmirkabir University of TechnologySep 2011 – Nov 2017
Ph.D.Dissertation: Theoretical-Experimental Model of Heat Generation in Ultrasonic Assisted Dry Creep Feed Grinding ProcessFurtwangen University – KSF Institute
Jun 2014– Jan 2015Sabbatical ResearcherAmirkabir University of TechnologySep 2008 – Jul 2011M.Sc.Thesis: Theoretical and Experimental Analysis of Ultrasonic Assisted Indentation Forming of TubeIsfahan University of TechnologySep 2004– Sep 2008B.Sc.Thesis: Design of Centrifugal Chip Lubricant Separator DeviceAwards & Honors 🏆Scholarship Award granted by the Ministry of Science Research and Technology of IranAward of the Alborz Regional Innovation and Flourishing Festival, National Elites FoundationPatent for “Design and Manufacture of Ultrasonic Assisted Indentation Forming Device”Award of Elite Entrance, National Organization for Educational Testing (NOET)Ranked 3rd among 39 Undergraduate Students, Mechanical Engineering Department, Isfahan University of TechnologyComputer Skills đź’»Mechanical Eng. Software: ABAQUS, ANSYS, CATIA, MasterCAM, MSC Visual

Nastran, Automation StudioProgramming Language: MATLABSoftware Packages: Microsoft Office, Windows

Awards & Honors 🏆

Scholarship Award granted by the Ministry of Science Research and Technology of IranAward of the Alborz Regional Innovation and Flourishing Festival, National Elites FoundationPatent for “Design and Manufacture of Ultrasonic Assisted Indentation Forming Device”Award of Elite Entrance, National Organization for Educational Testing (NOET)Ranked 3rd among 39 Undergraduate Students, Mechanical Engineering Department, Isfahan University of Technology

Computer Skills đź’»

Mechanical Eng. Software: ABAQUS, ANSYS, CATIA, MasterCAM, MSC Visual Nastran, Automation StudioProgramming Language: MATLABSoftware Packages: Microsoft Office, Windows

📊 Citation Metrics (Google Scholar):

Citations by: All – 87, Since 2019 – 70
h-index: All – 3, Since 2018 – 3
i10 index: All – 3, Since 2018 –3

 

📖 Publications  Top Note :

Investigation of laser-assisted cylindrical grinding of silicon nitride ceramics with controlled damage zone

Journal: Optics & Laser Technology

Date: July 2024

DOI: 10.1016/j.optlastec.2024.110616

Contributors: Esmaeil Ghadiri Zahrani; Masih Paknejad; Ali Zahedi; Bahman Azarhoushang

Laser-assisted surface grinding of innovative superhard SiC-bonded diamond (DSiC) materials

Journal: Ceramics International

Date: February 2024

DOI: 10.1016/j.ceramint.2024.02.323

Contributors: Masih Paknejad; Bahman Azarhoushang; Ali Zahedi; Mehdi Khakrangin; Robert Bösinger; Faramarz Hojati

Investigation of material removal mechanisms of laser-structured Si3N4 via single diamond grit scratching

Journal: The International Journal of Advanced Manufacturing Technology

Date: March 2023

DOI: 10.1007/s00170-022-10793-0

Contributors: Masih Paknejad; Bahman Azarhoushang; Ali Zahedi; Mehdi Khakrangin; Mohammad Ali Kadivar

Investigation of material removal mechanisms of laser-structured Si3N4 via single diamond grit scratching

Date: September 2, 2022

DOI: 10.21203/rs.3.rs-1974605/v1

Contributors: Masih Paknejad; Bahman Azarhoushang; Ali Zahedi; Mehdi Khakrangin; Mohammad Ali Kadivar

Ductile-brittle transition mechanisms in micro-grinding of silicon nitride

Journal: Ceramics International

Date: August 2022

DOI: 10.1016/j.ceramint.2022.08.088

Contributors: Masih Paknejad

Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming

Journal: ADMT Journal

Date: September 2020

DOI: 10.30495/admt.2020.1869462.1124

Contributors: Masih Paknejad

Effects of high power ultrasonic vibration on temperature distribution of workpiece in dry creep feed up grinding

Journal: Ultrasonics Sonochemistry

Date: November 2017

DOI: 10.1016/j.ultsonch.2017.04.029

Contributors: Masih Paknejad

Theoretical and experimental analyses of ultrasonic-assisted indentation forming of tube

Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Date: March 2014

DOI: 10.1177/0954405413501502

Contributors: Masih Paknejad