“Influence of Surface Pretreatment of Steel Substrate on the Interfacial Microstructure and Tensile Properties of Laser Al/Steel Joints”
Materials Letters (2024-12)
Focus: Investigates how surface treatments of steel substrates affect the microstructure and tensile strength in aluminum-steel laser joints.
DOI: 10.1016/j.matlet.2024.137523
“Study on Microstructure and Thermal Cracking Sensitivity of Deposited Ti6Al4V/Inconel 718 Composites Made by Two-Wire Arc Additive Manufacturing”
Materials (2024-12-06)
Focus: Explores the microstructure and cracking behavior of Ti6Al4V/Inconel 718 composites fabricated using two-wire arc additive manufacturing.
DOI: 10.3390/ma17235989
“The Differences in Bonding Properties and Electrical, Thermal Conductivity Between the Preferred Crystallographic Orientation Interface of Cu3Sn/Cu”
Surfaces and Interfaces (2024-03)
Focus: Studies the effects of crystallographic orientation on bonding and thermal/electrical properties at Cu3Sn/Cu interfaces.
DOI: 10.1016/j.surfin.2024.104152
“The Temperature Field Prediction and Estimation of Ti-Al Alloy Twin-Wire Plasma Arc Additive Manufacturing Using a One-Dimensional Convolution Neural Network”
Applied Sciences (2024-01-12)
Focus: Develops a CNN-based model for predicting temperature fields in additive manufacturing of Ti-Al alloys.
DOI: 10.3390/app14020661
“Dynamics of Microbubbles Induced by Thermal Shock in Inconel 718 Pulsed Laser Spot Welding and Formation of Micropores After Solidification in Molten Pool”
Journal of Materials Engineering and Performance (2023-12-07)
Focus: Examines microbubble dynamics and micropore formation during thermal shock in laser welding of Inconel 718.
DOI: 10.1007/s11665-023-08975-2
“Pulsed Laser Spot Welding Thermal-Shock-Induced Microcracking of Inconel 718 Thin Sheet Alloy”
Materials (2023-05-17)
Focus: Studies the effect of thermal shock on microcracking in thin-sheet Inconel 718 alloys.
DOI: 10.3390/ma16103775
“Study of Phase Evolution Behavior of Ti6Al4V/Inconel 718 by Pulsed Laser Melting Deposition”
Materials (2023-03-18)
Focus: Analyzes phase evolution in Ti6Al4V/Inconel 718 composite materials produced via pulsed laser deposition.
DOI: 10.3390/ma16062437
“Laser Welding Penetration Monitoring Based on Time-Frequency Characterization of Acoustic Emission and CNN-LSTM Hybrid Network”
Materials (2023-02-15)
Focus: Proposes a hybrid CNN-LSTM approach for real-time laser welding penetration monitoring.
DOI: 10.3390/ma16041614
“Heat Accumulation, Microstructure Evolution, and Stress Distribution of Ti–Al Alloy Manufactured by Twin‐Wire Plasma Arc Additive”
Advanced Engineering Materials (2022-05)
Focus: Explores heat accumulation, microstructure changes, and stress dynamics in Ti-Al alloys during twin-wire plasma arc manufacturing.
DOI: 10.1002/adem.202101151
“Effect of Weld Pool Flow and Keyhole Formation on Weld Penetration in Laser-MIG Hybrid Welding Within a Sensitive Laser Power Range”
Applied Sciences (2022-04-19)
Focus: Investigates weld penetration mechanisms during laser-MIG hybrid welding processes.
DOI: 10.3390/app12094100